ISO/IEC 17025:2017 and BIS Recognised Facility Specialising in Testing of Porcelain, Polymer & Epoxy Insulators, Bushings, AB Cable Accessories, IPC, Clamps & Power Line Hardware as per IS/IEC/BS/EN Standards.

Tabular Presentation of Tests & Corresponding Standards

A. Insulators (Porcelain / Polymer / Epoxy), Bushings & Accessories

Standard No.	Description
IEC 61109, IS 731, IS/IEC 62217	Climatic Ageing Test
IS/IEC 60068 Series, IEC 61109	Corrosion Test (Salt Fog / Salt Mist)
IEC 61109, IS 731, IS 2486	Electrical Ageing & Endurance Test
IEC 61109, IS 731	Mechanical Endurance Test
IEC 61109, IS 731, IS/IEC 62217	Thermal–Mechanical Performance Test
IEC 61109, IS 731	Sudden Load Release Test
IEC 61109, IS 731	Assembled Core Load–Time Test
IS/IEC 60587, IS/IEC 62217	Tracking & Erosion Test (1000 h)
IS 7905, IEC 60695 Series	Flammability Test
IS 731, IEC 61109, IS/IEC 60168	Dry & Wet Power Frequency Withstand Test
IS 731, IEC 61109, IS/IEC 60168	Flashover Test (Dry/Wet)
IS 731, IEC 61109, IS/IEC 60060-1	Impulse Voltage Withstand Test
IEC 60099-4 (for arresters), IS/IEC 60060-1	Lightning Impulse Residual Voltage Test
IS/IEC 60270, IEC 61109	Internal Partial Discharge Test
IEC 60099-4 (Surge Arresters)	Steep Current Impulse / Reference Voltage
IS/IEC 62217, IS/IEC 60815 Guidance	Accelerated Weathering Test

B. Clamps, Connectors, AB Cable Accessories & IPC

Standard No.	Description
IS 5561, BS EN 50483-2, IS 13573	Electrical & Mechanical Tests at Low, Ambient & High Temperature
BS EN 50483-2, IS 13573, NFC 33-040	Heating Cycle Test
BS EN 50483-2, IS 13573, NFC 33-040	Continuous Current Test
IS 5561, BS EN 50483-2	Millivolt Drop Test
BS EN 50483-2, IS 5561	Electro-Mechanical Test
BS EN 50483-2, IS 5561	Mechanical Endurance Test
IEC 61284, BS EN 50483-2	Tension Test (for tension clamps & anchoring clamps)
BS EN 50483-2, NFC 33-041	Pull-Out Test
BS EN 50483-5, IS/IEC 60068	UV Resistance / Ageing Test
BS EN 50483-2, NFC 33-040	Thermal Cycling Test

C. AB Cable Accessories / IPC / Pre-Insulated Joint Sleeves / Terminal Lugs

Standard No.	Description
BS EN 50483-2, IS 13573, NFC 33-040	Mechanical Tensile Test
BS EN 50483-2, NFC 33-040	Electrical Resistance / Voltage Drop Test
BS EN 50483-2, IS 13573	Thermal Cycle Test
BS EN 50483-4, NFC 33-021	Insulation Piercing Performance Test
BS EN 50483-3/4	Water Penetration Test
BS EN 50483-5	Ageing & Weathering Test
IS 13573, BS EN 50397-2	Dielectric Withstand Test
BS EN 50483-2/4	Pull-Out / Pull-Off Test

D. Surge Arresters (If Included Under Scope)

Standard No.	Description
IEC 60099-4	Lightning Impulse Residual Voltage Test
IEC 60099-4	Steep Current Impulse Test
IEC 60099-4	Reference Voltage Test
IEC 60099-4, IS/IEC 60270	Partial Discharge Test

E. Medium Voltage / High Voltage Switchgear Accessories

Standard No.	Description
IS/IEC 62271-1	Power Frequency Withstand Test
IS/IEC 62271-1	Lightning Impulse Withstand Test
IS/IEC 62271-102 / 103	Mechanical Operating Cycles
IS/IEC 62271-1	Temperature Rise Test